278 問 · 120 分 · 合格 700
You have an Azure Sentinel workspace that has an Azure Active Directory (Azure AD) data connector. You are threat hunting suspicious traffic from a specific IP address. You need to annotate an intermediate event stored in the workspace and be able to reference the IP address when navigating through the investigation graph. Which three actions should you perform in sequence?
You have an Azure subscription that contains the resources shown in the following table. VM1 and VM2 are stopped. You create an alert rule that has the following settings: Resource: RG1. Condition: All Administrative operations. Actions: Action groups configured for this alert rule: ActionGroup1. Alert rule name: Alert1. You create an action rule that has the following settings: Scope: VM1. Filter criteria: Resource Type = 'Virtual Machines'. Define on this scope: Suppression. Suppression config: From now (always). Name: ActionRule1. If you start VM2, an alert is triggered.
You have a hybrid configuration of Azure Active Directory (Azure AD) that has Single Sign-On (SSO) enabled. You have an Azure SQL Database instance that is configured to support Azure AD authentication. Database developers must connect to the database instance from the domain joined device and authenticate by using their on-premises Active Directory account. You need to ensure that developers can connect to the instance by using Microsoft SQL Server Management Studio. The solution must minimize authentication prompts. Which authentication method should you recommend?
You have an Azure subscription named Sub1 that contains the virtual machines shown in the following table. You need to ensure that the virtual machines in RG1 have the Remote Desktop port closed until an authorized user requests access. What should you configure?
You network contains an on-premises Active Directory domain that syncs to an Azure Active Directory (Azure AD) tenant. The tenant contains the users shown in the following table. The tenant contains the groups shown in the following table. The tenant contains the groups shown in the following table. You configure a multi-factor authentication (MFA) registration policy that and the following settings: Assignments: Include: Group1. Exclude: Group2. Controls: Require Azure MFA registration. Enforce Policy: On. User3 will be prompted to configure MFA registration during the user's next Azure AD authentication.
You create resources in an Azure subscription as shown in the following table. VNET1 contains two subnets named Subnet1 and Subnet2. Subnet1 has a network ID of 10.0.0.0/24. Subnet2 has a network ID of 10.1.1.0/24. Contoso1901 is configured as shown in the exhibit. An Azure virtual machine on Subnet1 can access data on Contoso1901.
Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure. Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com. Contoso identifies the following technical requirements: Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com. Whenever possible, use the principle of least privilege. Enable Azure AD Privileged Identity Management (PIM) for contoso.com. Contoso.com contains the users shown in the following table. Contoso.com contains the security groups shown in the following table. Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User9 creates the virtual networks shown in the following table. Sub1 contains the locks shown in the following table. Sub1 contains the Azure policies shown in the following table. Sub2 contains the virtual networks shown in the following table. Sub2 contains the virtual machines shown in the following table. All virtual machines have the public IP addresses and the Web Server (IIS) role installed. The firewalls for each virtual machine allow ping requests and web requests. Sub2 contains the network security groups (NSGs) shown in the following table. NSG1 has the inbound security rules shown in the following table. NSG2 has the inbound security rules shown in the following table. NSG3 has the inbound security rules shown in the following table. NSG4 has the inbound security rules shown in the following table. NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table. You are evaluating the effect of the application security groups on the network communication between the virtual machines in Sub2. From VM2, you can successfully ping the private IP address of VM4.
You have an Azure subscription that contains an Azure SQL database named SQLDB1. SQLDB1 contains the columns shown in the following table. For the Email and Birthday columns, you implement dynamic data masking by using the default masking function. Which value will the users see in each column?
You have an Azure subscription. The subscription contains 50 virtual machines that run Windows Server 2012 R2 or Windows Server 2016. You need to deploy Microsoft Antimalware to the virtual machines. Solution: You add an extension to each virtual machine. Does this meet the goal?
You have an Azure subscription that contains the virtual networks shown in the following table. The Azure virtual machines on SpokeVNetSubnet0 can communicate with the computers on the on-premises network. You plan to deploy an Azure firewall to HubVNet. You create the following two routing tables: RT1: Includes a user-defined route that points to the private IP address of the Azure firewall as a next hop address. RT2: Disables BGP route propagation and defines the private IP address of the Azure firewall as the default gateway. You need to ensure that traffic between SpokeVNetSubnet0 and the on-premises network flows through the Azure firewall. To which subnet should you associate each route table?
You have an Azure subscription that contains three storage accounts, an Azure SQL managed instance named SQL1, and three Azure SQL databases. The storage accounts are configured as shown in the following table. SQL1 has the following settings: Auditing: On. Audit log destination: storage1. The Azure SQL databases are configured as shown in the following table. Storage3 can be used as an audit log destination for DB3.
Your company uses Azure DevOps. You need to recommend a method to validate whether the code meets the company's quality standards and code review standards. What should you recommend implementing in Azure DevOps?
You have an Azure subscription. The subscription contains Azure virtual machines that run Windows Server 2016. You need to implement a policy to ensure that each virtual machine has a custom antimalware virtual machine extension installed. How should you complete the policy?
You have an Azure Subscription named Sub1. You have an Azure Storage account named Sa1 in a resource group named RG1. Users and applications access the blob service and the file service in Sa1 by using several shared access signatures (SASs) and stored access policies. You discover that unauthorized users accessed both the file service and the blob service. You need to revoke all access to Sa1. Solution: You create a lock on Sa1. Does this meet the goal?
You have an Azure subscription that contains a virtual network. The virtual network contains the subnets shown in the following table. The subscription contains the virtual machines shown in the following table. You enable just in time (JIT) VM access for all the virtual machines. You need to identify which virtual machines are protected by JIT. Which virtual machines should you identify?
You have an Azure subscription that contains the virtual machines shown in the following table. Subnet1 and Subnet2 have a Microsoft.Storage service endpoint configured. You have an Azure Storage account named storageacc1 that is configured as shown in the following exhibit. From VM1, you can upload a blob to storageacc1.
You have an Azure subscription named Subscription1 that contains the resources shown in the following table. You create a custom RBAC role in Subscription1 by using the following JSON file. You assign Role1 to User1 for RG1. User1 can modify the properties of storage1.
You are troubleshooting a security issue for an Azure Storage account. You enable the diagnostic logs for the storage account. What should you use to retrieve the diagnostics logs?
You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table. From Azure AD Privileged Identity Management (PIM), you configure the settings for the Security Administrator role as shown in the following exhibit. From PIM, you assign the Security Administrator role to the following groups: Group1: Active assignment type, permanently assigned. Group2: Eligible assignment type, permanently eligible. User3 can activate the Security Administrator role.
Litware, Inc. is a digital media company that has 500 employees in the Chicago area and 20 employees in the San Francisco area. Existing Environment Litware has an Azure subscription named Sub1 that has a subscription ID of 43894a43-17c2-4a39-8cfc-3540c2653ef4. Sub1 is associated to an Azure Active Directory (Azure AD) tenant named litwareinc.com. The tenant contains the user objects and the device objects of all the Litware employees and their devices. Each user is assigned an Azure AD Premium P2 license. Azure AD Privileged Identity Management (PIM) isactivated. The tenant contains the groups shown in the following table. The Azure subscription contains the objects shown in the following table. Azure Security Center is set to the Free tier. Planned changes Litware plans to deploy the Azure resources shown in the following table. All San Francisco users and their devices must be members of Group1. The members of Group2 must be assigned the Contributor role to Resource Group2 by using a permanent eligible assignment. Users must be prevented from registering applications in Azure AD and from consenting to applications that access company information on the users' behalf. Microsoft Antimalware must be installed on the virtual machines in Resource Group1. The members of Group2 must be assigned the Azure Kubernetes Service Cluster Admin Role. Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials. Following the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access. A new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1. Litware must be able to customize the operating system security configurations in Azure Security Center. The users in Group2 must be able to authenticate to SQLDB1 by using their Azure AD credentials. WebApp1 must enforce mutual authentication. Whenever possible, administrative effort must be minimized. Whenever possible, use of automation must be maximized. You need to meet the identity and access requirements for Group1. What should you use?
スコアの記録、時間制限付き模擬試験、AI解説をご利用になりますか？ 無料アカウントを作成